Epoxy Classic Filler

HomeShopEpoxy Classic Filler

RO-520 / Epoxy Classic Filler


Epoxy resin based, solvent free filler. It is a two
component, general purpose filler which is used in all kinds of sea vehicle
(Wood, Steel, Polyesters) works.

  • Easily sandpapered
  • Applied to the underwater and water level parts of the boat
  • Can be applied in one coat thickness of 1-2 cm
  • Used in solving of osmosis problems in GRP boats
  • It forms a solid surface to apply Undercoat, Antifouling and Final Layer paints.
  • Density is d=1,60 gr/cm3

Application :

The components A (Filler) and B (Hardener) are mixed volumetrically in 1/1 ratio, until the color turns out to be grey. It is applied through a steel trowel. Should not be applied in places where temperature is less than +10 degrees and humidity is over 70%.

Drying Time ( 20°C) : Pot life is 1.5 hours. Minimum drying time is 8-12 hours before sandpapering, second layer application is after 12-24 hours, full drying time is 24 hours. Chemical drying takes 7 days.

Flaming Point : 200 ° C

Storage Life : 2 years at room temperature.

Mixing Color : Grey