Epoxy Finishing Filler

HomeShopEpoxy Finishing Filler

R0-533 / Epoxy Finishing Filler


Epoxy resin based, solvent free, very light, resistant to aqueous and chemical

  • Smooth finishing before top coat paint.
  • Thus not added weight on the boat. Density less than water (d=0.80 ±2 gr/cm3 ).
  • Easily sandpapered.
  • Applied to the underwater and water level parts of the boat.

Application :

Remove dust, oil and dirt from the surface and apply at least 1 coat Epoxy Primer.

The components A (Filler) and B (Hardener) are mixed volumetrically in 1/1 ratio, until the color turns out to be red.

It is applied through a steel trowel. May not be applied in places where temperature is less than +10 degrees and humidity is over 70%. Thinner is used for cleaning thinner.

Drying Time ( 20°C) : Pot life is 1 hour under 20 C°. Minimum drying period before sanding is 24 hours. Second layer application requires 12-24 hours and full drying requires 24 hours. Chemical resistance comes after 7 days.

Flaming Point : 200 ° C

Shelf Life : 2 years at room temperature.

Mixing Color : Yellow