Fire Stop Top Coat

HomeShopFire Stop Top Coat

SK-875 Fire Stop Topcoat

Intumescent
It is developed for Fire Resistance of Steel and Wooden Structures.

  • It is developed for Fire Resistance of Steel and Wooden Structures.
  • It is boron modified, water-based latex resin based and it is fire retardant until 800 C -1200 C
  • It is final layer coating strengthened by Nano technology.
  • Prevents spread of the fire by swelling, It does not pass toxic gases.

It does not cause leakage in ceiling and roof applications, it is thixotropic.

Minimum 500pm application may be performed in single layer, it does not crack.

Prevents the steel structures get deformed by heating during fire.

Retards the fire between 30 minutes and 180 minutes according to application thickness

(500 pm and 1000 pm).

It is also used in wooden and polyurethane foam surfaces apart from metalsections.

Produced according to present fire regulation. It is tested according to TSE or EN standards.

Application:

All kinds of dirt, oil and rust on the surfaces should be cleaned. It is

applied by brush, roll or spraying.

It is applied in a thick way. It is ready to use. At least 6 hours should be waited

between the layers. Fire resistance increases as the thickness increase.

Drying Time (20°C): Complete Drying : 36 hours.

Consumption: 0,500 – 1200 kg/m²

Shelf Life: 6 months at room temperature.

Color: White – Light Grey