Polyurethane Top Coat

HomeShopPolyurethane Top Coat

RO-960 / Polyurethane Topcoat

 

Polyurethane Top Coat is a two component polyurethane finish with an
excellent resistance to the industrial and marine environment.

  • Polyurethane Top Coat is a two component polyurethane finish with an excellent resistance to the industrial and marine environment.
  • Extra UV resistant. Low solar absorption
  • Superior gloss and colour retention.
  • Highly resistant to a lot of chemicals, oil, sea water and corrosion.

Marine topside, deck and superstructure.

Offshore environments, refineries, power plants, bridges and buildings.

Suitable for a wide range of industrial structures.

Floors and Wood surfaces

 

Application:

The surface must be cleaned from dust, oil, dirt and corrosion which will

decrease adherence. The Polyurethane Top coat can be applied to suitable Epoxy

Primers, and Polyurethane Undercoats.

Main material is mixed with hardener by 4:1 ratio (weight).

It should be applied minimum 2 layers with intervals of

24 hours between layers.

Do not mix more paint than can be used in 1 hour. If necessary thin with Pu-50 Thinner.

When applied by brush or roller, apply in smooth and gentle strokes.

Apply crosswise to ensure an even distribution of the paint.

Relative humidity should be less than 90 %RH

Consumption: It is 0,200 L/m² for each layer. (Approximate thickness of 60 Microns of dry film).

Drying Time ( 20°C) : Pot life is 4 hours. Recoat time: 12 hours, Fully cured 5 days.