Propeller Protector

HomeShopPropeller Protector

RO-075/Propeller Protector

 

It is solvent based coating.

  • Resistant against shocks, chemical substances.  Excellent adhesion properties
  • Reduces contamination, it does not get dark or yellow.
  • Transparent.
  • UV resistance is high.

used on outdrives, outboard legs, propellers and sterngear.

• Prevents and delays rusting by means of anti-corrosive additives within it.

 Application : Applied by brush, spray guns or submersion. Thinned by Toluen – Xylene at the rate of 15% for spray gun and submersion applications.

Clean new surfaces with solvent. Surface heat should at least be 8°C in order to prevent fluid condensation and concentration.

Drying Period (20°C):  Touching is 15 minutes later, second coat application is 60 minutes later.

Consumption: 13-15 m² / L in single layer according to the surface condition.

Minimum 3 coats are recommended.

Solvent /Cleaning: Toluen – Xylene