Rubber Coat / 1k

HomeShopRubber Coat / 1k

IZ- 545 Rubber Coat

1k- Water Based

Water based rubber emulsion, polyurethane modified with silicone.
Can easily be applied on plaster, exposed concrete, asbestos, cement surfaces. Resistant
against positive water pressure.


  • Elastomeric structure (750%) and does not crack under temperature differences,surface movements and fills the capillary cracks.
  • High level of UV resistance.

It is used in the horizontal and vertical applications in the indoor and outdoor spaces, at locations such as foundations, retaining walls and basements where movement, vibration and slight settlement is possible, in the insulation of terraces, balconies and roofs and in the insulation of manholes, concrete pipes, flower beds.


The surfaces should be cleaned off dust and dirt.

  • Silicone Lac should be applied as 1 coat by at least 100% thinning before the application in the old and new buildings.
  • Then, IZ-545 Rubber coat should be applied, by a thick roll or pistol as 2 coats without thinning. Recoating time is 48 hours. Each coat should be applied or sprayed in one direction. The final coat should be applied perpendicular to the brush, roller or spraying direction applied during the previous coat. When it dries, it forms a hard, seamless insulation layer, elastic like linoleum.

Drying Time (20°C): Touch Dry :3-5 hours

Full Dry : 24 hours Protect from rain, frost and dew at least for 8 hours following the mechanical application. It acquires mechanical resistance after 3 days. İt becomes waterproof after 7 days.

The final resistance is acquired after 14 days.

Storage Life: 12 months in room temperature.

Consumption: For two coats, about 1,000 – 1,500 L/m2

Color: Black